maltby custom golf clubs, maltby woods, maltby golf clubs, maltby custom golf equipment, maltby used golf clubs, and discount golf clubs by 1998 Golfsmith Distinguished Clubmaker

"Spend Minutes Getting Fitted..Spend The Rest Of Your Time Hitting Better Shots"®

CT 250 Flight Control uses a tungsten weight system to customize the head for specific shot types.
The key to the system is the weight of the tungsten, approximately 14 grams, that can be placed into either a draw biased position, a neutral position, or a fade bias position. Heel chamber weighting yields the draw bias, toe chamber weighting yields a fade bias and rear chamber weighting yields a neutral position.
A rubber sealer also provides sound dampening that greatly improves the sound and feel of the head.
Casting process used in the manufacturing of the Flight Control titanium head is the same used by most high end Titanium brands and provides a structural integrity and consistency not seen in 4-piece forged titanium metal woods.
The face is forged under extremely high temperatures from a high strength SP-700 beta titanium. The forging process used on the face yields a tighter grain structure for more strength. The variable face thickness design incorporated into the Flight Control drivers expands the performance area of the face.
The CT 250 Flight Control Drivers can be ordered with either a draw bias, neutral, or fade bias. The tungsten weights are interchangeable, offering the ultimate in customization.
Four lofts are available: 8.5, 9.5 10.5 and 12 degrees, with the 10.5 and 12 degree models incorporating a .5 degree closed face.
Black metallic finish , 58 degree lie perfect for all golfers
Price: Graphite $249/each includes Winn Grip
Select Options

Loft
Flex

2 Models available - an all-Titanium four-piece forged model, and the same design with a composite crown that relocates more mass to the perimeter
Three permanently mounted tungsten screws concentrate mass at the rear and sides for improved head stability & optimal launch angle
Both Models Feature
- 15-333 forged Beta-Titanium high strength face for maximum legal spring effect
- Tungsten screw weighting for maximum stability and optimal launch angle
- 2.15" face height with 10" of bulge and roll for ideal spin rate and launch angle
Titanium Model Features
- 4-piece 450cc forged Ti body for optimal weight distribution
- 6º, 8º, 9.5º, 10.5º and 11.5º lofts (10.5º in LH) with a .5º closed face in the 10.5º and 11.5º lofts
Composite Ti Model
- 450cc body with ultra lightweight, ultra strong composite crown for weight distribution that aids getting the ball airborne
- 9.5º and 10.5º and a .5º closed face in the 10.5º loft
Graphite Shaft - $229/each
For shaft upgrades, grip, and special services options - click here

Select Options

The new Maltby KE4 450cc cast titanium driver is truly a break- through in driver design.
Besides having one of the best head shapes ever designed in a 450cc driver, the KE4 driver features a new, unique "Screw Within a Screw" weighting system.
“Screw Within a Screw” weighting system allows for a variety of shaft length and shaft weight options without sacrificing a manageable swingweight or total weight.
The two piece construction features a cast body to eliminate wasted material caused by welding and a proprietary forged face design milled to exact specifications.
Two piece construction Cast body w/Milled forged face Proprietary variable face design to enhance spring effect over the entire surface of the club face.
Square Face is forged and then milled to exact tolerances
56.5 Degree Lie
Graphite Shaft - $229/each
Free headcover and wrench
Select Options

Maltby KE4 Fairway Woods
For shaft upgrades, grip, and special services options - click here

The Maltby KE4 fairway woods feature a classic head shape when viewed from the playing position, but have also been designed with plenty of high tech, performance enhancing characteristics.
The consistent face heights of 1.375" throughout the set provide a very low and rearward center of gravity in the lower lofted woods to promote a high penetrating ball flight while the higher lofted woods have face heights deep enough to prevent “pop ups” when playing from deep grass.
“Screw-Within-a-Screw” weighting system allows head weight to be reduced by 8 grams or increased by 6 grams
Classic head shapes
Square face angles
Consistent 1.375" face heights
Available in 3, 5, 7, 9 & 11 wood options
Cast 17-4 Stainless Steel
Black with Blue Metallic Finish
RH - 14°, 18°, 21°, 24°, 27°
Graphite $139/each

Maltby CT250 Fairway Woods

For shaft upgrades, grip, and special services options - click here

CT Fairway Wood and Hybrid lines, all designed to complement the Ultra Playability of the CT Driver models
High strength, light weight construction permitting the concentration of weight in the form of permanently mounted tungsten or stainless steel screws on the sole towards the rear and perimeter
Gives all of these models exceptional playability, with a lot of stability and an enhanced ability to pick the ball off the turf and up into the proper trajectory
Available in two models: one in stainless steel and one with a graphite crown. The 17-4 stainless model is available as Tour-3, 3, 5, and 7 and woods. The Tour-3 has 12 degrees of loft, making it ideal as a high lofted, compact driver!
Graphite crown model is available as 3, 5 and 7 woods.
Both models have high strength 455 Maraging Steel forged faces, reducing the weight at the face and maintaining very high strength.
The graphite crown model offers a slightly lower center of gravity to help get the ball to the optimum trajectory. Both models use four stainless steel screws to concentrate weight low and to the perimeter.
Square Face Angles
Tour-3 wood with 12° loft, 3, 5 and 7 woods
Dark Black Cherry Metallic Finish
RH - 12°, 15°, 18°, 21°, 24°, 27°
Graphite $129/each
Select Loft
Select Flex

Home | Privacy Statement | Return Policy | Guarantee | About Us

"Online Custom Golf Clubs since 1996"